Delta CCTV

Elmdene UPS standby power 

Product Overview The Elmdene 4HR UPS Range has been designed to provide a cost effective solution for providing extended standby power to critical security applications such as PoE IP CCTV or Access Control systems. The range is available in three different power variants: 75W, 175W, 250W. When used with the recommended standby batteries the devices will provide a minimum of 4 hours standby time at full load in the event of a mains failure. All models are housed within a standard 4U 19” rack enclosure, providing a true sine wave 220V ac output for the powered devices. Front panel LED status indication allows quick system diagnosis on the front panel. Volt-free fault outputs are available on the rear panel for remote signalling if required. This range offers the installer a simple ‘plug and play’ UPS installation, utilising industry style batteries and enclosures.

Features:

•  75W, 175W, 250W versions available
•  Pure Sine Wave 220V ac output
•  LED indication (mains present, mains loss, standby mode)
•  24Hr recharge time
•  Mains Loss - Volt-free fault output
•  PSU Fault - Volt-free fault output
•  Battery Fault - Volt-free output
•  Temperature compensated battery charging
•  Universal mains input 90 - 264V ac
•  Single IEC C13 220V ac outlet
•  Single IEC C14 mains input (lead provided)
•  Can accommodate 2 x 12V 17Ah batteries (75W version)
•  Floor standing battery enclosure with 3m lead for either 2 x 12V 38Ah (175W) or 2 x 12V 65Ah (250W)